Type: Driver
File Name: cs4231a_kl_83286.zip
File Size: 29.2 MB
81 (3.37)
Downloads: 67
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now

BoxAustin, TX Fax: This document contains information for a new product.

Crystal Semiconductor reserves the right to modify this product without notice. R2, Cs4231a kl R3, RO R3, WO I11, RO This specification is guaranteed by characterization, no production testing.

Vintage Crystal Csa-kl 16bit Sound Audio Card for sale online eBay

F capacitor on the VREF pin. Specifications are subject to change without notice. DC current only. If dynamic loading exists, then the voltage reference output must be buffered or the performance of ADCs and DACs will be degraded. All mixer and output gain tables assume the output level bit, OLB, in indirect register 16 I16 is set, cs4231a kl the input and output full scale values are equal.

  • CSA-KL中文资料_百度文库
  • Crystal Semiconductors CSA-KL driver - Crystal Semiconductors Sound Card Drivers -
  • Vintage 1994 Crystal Cs4231a-kl 16bit Sound Audio Card
  • CS4231A-KL ETC ETC, CS4231A-KL Datasheet
  • Description

Normal operation is not guaranteed at these extremes. Cs4231a kl only one crystal is used, it must be XTAL1. When using two crystals, the high frequency crystal should be on XTAL1 which is designed for higher loop gains. Sample frequency specifications must not be exceeded.


F Ferrite Bead 0. Five analog inputs are provided and three can be multiplexed to the ADC.


The line input, two auxiliary inputs and a mono input can be mixed with the output of the DAC with full volume control. Several data modes cs4231a kl supported including cs4231a kl and bit linear as well as 8-bit companded, 4-bit ADPCM compressed, and 16bit Big Endian.

Enhanced functionality is provided by a second mode on the CSA. This section describes the analog hardware needed to cs4231a kl with these pins.

Analog Inputs The analog cs4231a kl consist of four stereo analog inputs, and one mono input. Unused analog inputs should be connected together and then connected through a capacitor to analog ground.

hp dl320 g3 raidRecent Blog Posts
free e3dxShop by category
canopus dvx-e1Write a Review
foxconn 6627ma rs2hTop 5 for Sound card category:
intel p4145gx pe audioTop 5 for Sound card category:

This fourth input to the mixer cs4231a kl the recommended mixer configuration for MPC Level-2 compliance. The LINE mix register provides 32 volume adjustments in 1. In addition, there is a one bit mute control. The additional MODE 2 functions are: 1. Selectable serial audio data port.


Three of these sources are multiplexed to the ADC. All audio inputs should be capacitively coupled to the CSA. F Figure 3. The attenuation control allows cs4231a kl levels in -3dB steps.

In addition, a mute control is provided. The attenuator is a single channel block with the resulting signal sent to the output mixer where it is mixed with the left and right outputs. Figure 4 illustrates a typical input circuit for the Mono In. Although this input is described for a low-quality beeper, the input is of the same cs4231a kl as all other analog inputs and may be used for other purposes.


At power-up, the MIN line is cs4231a kl as is cs4231a kl mono out line allowing the initial beeps heard, when the computer is initializing, to pass through.The CSA is a pin compatible upgrade to the CS and CS ORDERING INFORMATION: CSA-KL. 0 to 70°C.

Crystal CS4231A-KL ISA Sound Card

pin PLCC. CSA-KQ. Request ETC ETC CSA-KL: CSA-KLPARALLEL INTERFACE MULTIMEDIA AUDIO CODEC online from Elcodis, view and download Cs4231a kl pdf.

Relevant Posts